5E Series C/H/N Elemental Analyzer is used to determine carbon, hydrogen, nitrogen content in solid and liquid material, such as coal, coke, oil, petroleum, biomass, fertilizer, plastic, food, hydrocarbons and plant tissue, leaves and tobacco, which is widely applied in power plants, coal mines, metallurgy, chemical industry, commercial inspection, scientific research, food industry, education etc.
Please leave your E-mail address before download the product PDF. Your cooperation is appreciated.
Warm prompt: Please make sure you entered a correct E-mail address. We will send you relevant information and product quotation regularly.
Standard Configuration: Computer
High purity copper
H2O sorb reagent
Standrad Reference Material(GBW)
AR427 com-aid for liquid sample
Additional1 2 4 layers carousels
4cm x 4cm size tin-foil cup
Bigger size hole carousel
5E-CHN2200 to test Carbon, Hydrogen, Nitrogen content
5E-CH2200 to test Carbon, Hydrogen content
5E-TCN2200 to test Nitrogen content
5E-TCN2210 to test Nitrogen contentPre-sale
5E-IRH2200 to test Hydrogen content
5E-IRC2200 to test Carbon content
5E-CN2200 to test Carbon content, Nitrogen content
CO2 sorb reagent
1. High throughput: standard auto loader for 35 samples per layer, stackable to 4 layers available.
2. Dual-stage furnace system with pure oxygen flow to ensure the complete combustion of all samples.
Good Environment Adaptability
1. Optimum gas circuit provides good gas tightness of the system.
2. O-ring free from heat resource.
1. Independent detectors to determine C, H, N respectively. Analysis of CH mode and CHN mode can be chosen on software. (For 5E-CHN2200)
2. Saving time, gas and reagent: only 5.5ml blended gas needed to be analyzed.
The operator is limited to just adding sample to auto sample loader. Then the instrument will finish the test, cool down and shut off automatically.
|Model||5E-CHN2200 Elemental Analyzer|
|Conforms to Method||AS 1038.6.4, ASTM D5373, ASTM D5291, ISO 16634, ISO 16948, ISO 29541, EN 15407,EN ISO 16948:2015-0, GB/T 30728, GB/T 30733, UNI 15104, UNI CEN/TS 15407|
|Analysis Time||7 mins, depending on sample combustion conditions|
|Sample Loader||Stackable auto loader, up to 140 samples by 4 layers|
|Repeatability||Carbon(Cad)≤0.5%, Hydrogen(Had)≤0.15%, Nitrogen(Nad)≤0.08%|
|Sample Mass||Up to 1000mg, depending on sample matrix|
|Gas Required*||Helium, 99.99%, 0.25± 0.01 Mpa|
|Oxygen, 99.99%, 0.25± 0.01 Mpa|
|Nitrogen or compressed air, 0.25± 0.01 Mpa|
|Furnace Type||Resistance furnace, Max temp 1050℃|
|Power Supply||Single phase, AC220V ±10% , 50/60Hz, 5.5kW|
|*Test Condition: If N≤0.8%, 99.999% high purity oxygen is required.|
Infrared carbon analysis cell
Infrared hydrogen analysis cell
U-type combustion tube
Big purifying tube
Small purifying tube
High purity reduced copper
Anhydrous magnesium perchlorate
Steady flow valve
Oxygen reducing valve
Sample feed mechanism
Thermal conductivity cell assembly
Secondary combustion tube stopper weldment
Oxygen lance assembly
Guide pipe components
Cover of sample box
Left guide rail
Right guide rail
Bite type nuts
Furnace wire mat
Bite type clamp
Lower connector base
Lower pipe connector
Control board (CHN2200)
High purity reduced copper
Five-port magnetic valve
Three-port magnetic valve
Speed control valve
Two-port solenoid valve
Separate direct connection
Stainless steel connector (Filter connector)
Heating blanket II
Fan protection net
InquiryPlease feel free to submit your inquiry information to us.