Home > Products > Calorimeter
5E-C5500 is used to determine the calorific value of solid and liquid combustibles including oil, coal, coke, foodstuffs and biomass products. The calorific value is a crucial characteristic for each substance, also the key point to calculate the price of coal, so it will directly affect the economic benefits of the customers. This technique is widely applied in power plants, coal mines, metallurgy, chemical industry, commercial inspection, scientific research, etc.
Please leave your E-mail address before download the product PDF. Your cooperation is appreciated.
Warm prompt: Please make sure you entered a correct E-mail address. We will send you relevant information and product quotation regularly.
|
Standard Configuration: Main analyzer: Controlling Unit and Chiller
Standard CV bomb Computer Handle Oxygen Charger Crucibles Optional Configuration: Lens paper Pellet press Bench-top oxygen charger Halogen Resistant Oxygen Vessel |
Ignition Wire Benzoic Acid O-ring kit Tool kit |
Features:
True Isoperibol CalorimeterThe jacket surrounding the vessel is kept at constant temperature with an accuracy to 0.1℃ during analysis.Mechanical supports for the vessel are made of a very lowthermal conductivity plastic. To minimize convention,water is added on the sides,top and bottom of the bucket.
High Automation and Efficiency1. Dynamic method available, without compromising accuracy or precision.
2. Second oxygen vessel and sample can be prepared while the current sample is being analyzed.
3. Two calorimeters can be controlled by one computer.Sample mass can be transferred to PC directly.
Optimized Design for Reliable Test Result1. A reliable quantitative measuring cup ensures stable water volume of the bucket.
2. Closed-loop water circulation assures the purity of water system without any additional solution.
3. Filter in the bucket purify the water in circulation system.
4. Visible water level indicates the water volume, making it easy to feed sufficient water anytime to minimize the influence of water loss.
| Model | 5E-C5500 Automatic Calorimeter | |
| Conforms to Method | AS 1038.5, ASTM D5865, ASTM D4809, ASTM E711, BIS 1350, BS EN 15400, GB/T213, GB/T30727, ISO1928, ISO9831, ISO 18125, ASTM D240 | |
| Precision (1g Benzoic Acid) | 0.05% RSD* | |
| Measuring range | Up to 50000J | |
| Temp.Resolution | 0.0001℃ | |
| Control Ability | 2 Units/ 1 PC available | |
| Analysis Time per Sample | Dynamic method:about 10mins; Classical method:about 15mins | |
| Jacket Type | Isoperibol | |
| Heating Capacity Stability | ≤0.2% within one year | |
| Balance Connection | Available | |
| Network Connection | Available | |
| Bucket Filling | Automatic | |
| Oxygen Filling | Semi-Automatic | |
| Structure | Benchtop or Vertical | |
| Bomb Vessel Lifting | Manual | |
| Power Supply | Single phase, AC220V±10%, 50/60Hz, ≤500w | |
| Net Weight | Bench top: 75kg | |
| Vertical type: 103kg | ||
| Dimensions(L×W×H) | Bench top: 480mm×500mm×420mm (Analysis unit) 370mm×500mm×420mm (Temp. control unit) |
|
| Vertical: 480mm×400mm×940mm | ||
| *Test Condition: 1. Ambient temp.20℃±1℃,humidity75%±5% 2. No strong interference source nearby 3. Clean water circuit with distilled water 4. Refer to the precision of ten acceptable calibration test runs | ||
.jpg)
Oxygen vessel holder
Exhaust valve
Bench-top oxygen charger
Handle oxygen charger
Wipe cloth
Ignition wire
Crucible
Bomb lift
Mainboard
Ignition board
Temperature measuring board
Solid-state relay
Relay
Transformer
Switching power supply
Control panel
Serial wire with magnetic ring
Measuring vessel
Pressure reducing valve
Magnetic pump
Crucible holder
Three-core power wire
O-ring-12×3
O-ring-18×2.4
O-ring-12×2
O-ring-16×2.65
O-ring-60×5.7
O-ring-6×1.9
O-ring (Bucket)
Guide pipe components
Pressing machine
Benzoic acid
standard coal
Probe (Bucket)
Suspender II
Suspender I
Crucible
Lens paper
Oxygen vessel
related products
InquiryPlease feel free to submit your inquiry information to us.
