Home > Products > Elemental Analyzer

5E-HGT2321 Automatic Mercury Analyzer

  • CKIC 5E-HGT2321 Automatic Mercury Analyzer
  • CKIC 5E-HGT2321 Automatic Mercury Analyzer
  • CKIC 5E-HGT2321 Automatic Mercury Analyzer

    5E-HGT2321 Automatic Mercury Analyzer is used to determine trace mercury both in liquid and solid samples such as coal, coal fly ash, soil, sludge, sediment, ore, mineral, food, waste water and feed.

    Please leave your E-mail address before download the product PDF. Your cooperation is appreciated.

    Warm prompt: Please make sure you entered a correct E-mail address. We will send you relevant information and product quotation regularly.

    • Features
    • Specification
    • Spare parts
    • Case
    Standard Configuration: Computer
    Printer
    Long Cell Components
    Short Cell Components
    Mercury Lamp Components
    Sample Boat (Quartz)
    Amalgamation Tube 

    Sample Holder
    Silicone Grease
    Standard Mercury Solution
    Arm Manipulator Components
    Amalgamation Tube Resistance Wire
    O-ring kit
    Tool kit


    Operation Principle:
    5E-HGT2321 is a direct mercury analyzer based on the U.S. EPA Method 7473. This method eliminates the need of sample preparation.
    The process involves drying,combustion and evaporation at high temperatures with air. The gases are carried through a heated catalyst that removes halogens, nitrogen oxides, and sulfur oxides. The remaining dry combustion products including mercury atoms are swept through a gold amalgamation tube. The amalgamation tube captures all of the mercury atoms at low temperature. Then the  amalgamation tube is heated to a higher temperature to release  mercury as atoms again, mercury atoms mixed into the air for the analysis using cold vapor atomic absorption spectrometer (CVAAS).

    Features:Safety FirstDetermine total mercury directly without sample preparation. No hazardous waste produced and no corrosive chemicals used.

    High Efficiency
    Get results in 2-5 minutes. An auto-sampler with as many as 45 sample positions is  provided.

    Wide Application5E-HGT2321 is able to analyze a variety of sample types including solids and liquid in a wide range of applications.

    Easy Operation
    Just input the sample mass into software and load the sample onto the auto-sampler, 5E-HGT2321 will finish the test automatically.

    Minimum Analysis Cost
    Compared with the traditional CV-AAS mercury analysis techniques, 5E-HGT2320 saves more than 70% in cost for customers.

    Good Enviro-Adaptabililiy
    All the quartz tubes can be heated, which could effectively remove moisture and  eliminate the memory effect of residual mercury.

    Sample Application
    Coal
    Soil
    Ore
    Minerals
    Food

    Feed
    Fertilizer
    Wastewater
    Sludge

    Typical Results
    Sample No. Measured(PPM) Certified(PPM)
    Coal GBW11160 0.090 0.096
    Coal GBW11159 0.127 0.13
    Coal GBW11157 0.196 0.19
    Coal GBW11156 0.31 0.32
    Coal SARM20 0.245 0.25
    Coal GBW07403 0.058 0.06
    Coal BCR277R 0.135 0.128
    Coal GBW07405 0.302 0.29
    Model 5E-HGT2321 Automatic Mercury Analyzer
    Conforms to Method US/EPA 7473, ASTM D6722
    Principle Sample Thermal Decomposition, Atomic Absorption
    Instrument control External PC computer system
    Sample types Liquid or solid
    Max. Sample Volume (Liquid)* 1000 µl (ceramic boat), 1500 µl (nickel boat)
    Max. Sample Weight (Solid)* 1000 mg (ceramic boat), 1500 mg (nickel boat)
    Light Source Low pressure mercury lamp
    Hg wavelength 253.65 nm
    Detectors UV enhanced photodiodes (2)
    Number of samples 45 with small or large boats
    Detection limit 0.005 ng Hg
    Working Range Automatic scale change / Dynamic range 0-1000 ng Hg
    Repeatability <1.5 % (1ng Hg)
    Typical Analysis Time 2-5mins
    Sample treatment
    Drying time
    Decomposition time
    Waiting time
    Adjustable from
    1-999s
    1-999s
    1-999s
    Calibration Standard solution or CRM
    Number of standards Minimum 2 (blank & high), maximum 33
    Carrier gas Air
    Peak flow 50-300ml/min
    Peak (W) -Energy consumption <3000W
    Standby (W)-Energy consumption <100W
    Power Supply AC110/220V, 50/60Hz
    Weight (kg) 50kg
    Dimensions (L x W x H) 763mmx595mmx435 mm
    *Depend on different sample density

    InquiryPlease feel free to submit your inquiry information to us.